vario flex
Commissioning
36
Order h49 7144.907-333
8 Commissioning
8.1 Commissioning safety
DANGER
Serious injuries caused by workpieces being
ejected centrifugally or dropping out if clamping
force is insufficient!
Workpiece blanks must not be outside the clamp-
ing width diameter.
Prior to commissioning, set the actuation force to
the permitted, established machining value.
Check the clamping force at regular intervals and
correct if necessary.
WARNING
Serious injuries can be caused if the machine tool
starts up accidentally!
Prior to commissioning, close all safety doors or
hoods on the machine tool.
WARNING
Serious injuries caused by tools and items of test
equipment being ejected centrifugally!
Prior to commissioning, ensure that all tools and
items of test equipment are removed from the
working area of the machine.
NOTE
Serious damage to materials / the product caused
by workpieces being ejected centrifugally or drop-
ping out if clamping force is insufficient!
Workpiece blanks must not be outside the clamp-
ing width diameter.
Prior to commissioning, set the actuation force to
the permitted, established machining value.
Check the clamping force at regular intervals and
correct if necessary.
NOTE
Damage to components caused by cooling lubri-
cants with sufficient levels of corrosion inhibitor!
The components made of steel materials must be
protected before the usual oxidation process.
Only ever use cooling lubricants with sufficient
levels of corrosion inhibitor.
