vario flex
Layout and function
22
Order h49 7144.907-333
4 Layout and function
4.1 Overview and brief description
1
Gas pressure spring
2
Seal ring for rinsing
3
Clamping nut
4
Clamping ring
5
Seal ring for support
6
Adapter disc
The ejector is there to eject workpieces automatically.
The ejector is equipped with a gas pressure spring.
This sub-assembly can still be converted to enable media
lines on the machine tool such as flushing and air system
check to be connected.
The ejector is secured in the clamping device by radial
clamping screws.
A workpiece-specific limit stop can be installed on the
adapter disc.
The gas pressure ejector can be adjusted using the clamping
mechanism in the depth.
For the option of media connection, the gas pressure spring
is removed and a media supply is connected.
4.2 Accessories required
4.2.1
Clamping device
The clamping device is mounted on the machine spindle.
4.3 Optional accessories
4.3.1 Workpiece end-stop
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
