Hainbuch SPANNTOP NOVA, Руководство по установке

Страница: 43 / 112

SPANNTOP [nova] – Technical data
WARNING!
Risk of injury!
Using false technical data can lead to serious
personal injury and property damage.

The technical data [label on the product, as-
sembly drawing] must be observed and may
not be modified by the operator!
3.2 Clamping force diagram
In the diagrams, the effects of friction and the clam-
ping diameter are included.
NOTE!
The measured values for the radial clamping
force F
rad
may not leave the permitted area. Un-
der optimal conditions, the values for F
rad
are
below the top, in bad conditions above the
lower limit.

If the measured clamping forces are outside
the allowed range, the maintenance is man-
datory to perform. After servicing, the clam-
ping forces have to be re-examined.

If the clamping force even after the mainte-
nance is not in the permitted area please
contact the manufacturer.
Example for size 42/52:
With an axial force F
ax
of 25 kN the radial clamping
force F
rad
is, depending on the maintenance state of
the clamping device, in the range between 22 kN and
66 kN; it must not be smaller than 22 kN.
Order h49 7144.907-333 43