Hainbuch SPANNTOP NOVA, Руководство по установке

Страница: 91 / 112

SPANNTOP [nova] – Disassembly
7.6 Disassembling the clamping unit SPANNTOP [nova] combi
deadlength and SPANNTOP [nova] combi pull-back size 32-120
3. x

From weight 15 kg the task requires two people, or
use a crane.

Special tools required:

Use load-handling equipment from weight 15 kg

Allen wrench
1. Put the machine tool in set up mode.
2. Disassemble the base end-stop [see section »Di-
sassembling the base end-stop«].
3. From weight 15 kg mount the eye bolts [see secti-
on »Unpacking and inner-company transport«].
WARNING!
Danger of injury due to vertical suspended
spindle!
Bending into the machine work are when as-
sembling overhead can cause severe head in-
juries.

Secure components prior to overhead as-
sembly.

For assembly on a vertically suspended
spindle always use a suitable mounting aid.
Fig. 75
4. Vertically suspended disassembly:

Place the assembly plate [illustration is symbolic]
on the tool turret.

In jog mode, move the spindle slowly and care-
fully downward until the clamping unit touches
the assembly plate.

Loosen and remove the cylindrical screws using
an Allen wrench.

Turn the clamping unit counterclockwise so that it
comes out of the machine spindle. If required,
slowly and carefully move the machine spindle
upward.

When the clamping unit is completely disassem-
bled, move the machine spindle completely up-
ward.

Use a crane to take the clamping unit with draw-
tube adapter off of the assembly plate.

Remove the assembly plate from the tool turret.
Order h49 7144.907-333 91