Hainbuch SPANNTOP NOVA Скачать руководство пользователя страница 60

Страница: 60 / 112

SPANNTOP [nova] – Transporting, packaging and

storing

5 Transporting, packaging and storing

5.1 Safety instructions for transporting

Unbalanced package

WARNING!
Danger of falling due to an unbalanced
package

Packed goods can have an unbalanced packa-
ge. If attached incorrectly the package can tip
and cause life-threatening injuries.



Note the markings on the packages.



Attach the crane hook in such a manner that
it is located above the center of gravity.



Carefully lift and see if the load tilts. If ne-
cessary change the attachment.

Transport!



For transport always use a suitable clamping
means / crane.



Make sure that a rolling / falling of the clam-
ping device is not possible.

5.2 Symbols on the packaging

Fragile

Identifies packages with fragile or sensitive contents.
Handle the packed goods with care; do not allow
them to fall, and do not subject them to impact.

Protect from moisture

Keep packed goods dry and protected against moi-
sture.

Order h49 7144.907-333

Содержание SPANNTOP NOVA

















































































































Результаты поиска

Содержание SPANNTOP NOVA

Отзывы:

Похожие инструкции для SPANNTOP NOVA

Бренды по названию

Популярные бренды

Hainbuch SPANNTOP NOVA, Руководство по установке

Результаты поиска

Содержание SPANNTOP NOVA

Отзывы:

Похожие инструкции для SPANNTOP NOVA

Бренды по названию

Популярные бренды