Hainbuch SPANNTOP NOVA, Руководство по установке, Страница: 73 / 112

SPANNTOP [nova] – Assembly
Fig. 42
7. Horizontal or vertical standing assembly:

Use a crane to lift the clamping unit with drawtu-
be adapter into the machine and place it on the
drawtube of the machine tool.

Screw the drawtube adapter with the clamping
unit onto the drawtube of the machine tool to the
end. In this process ensure that the drawtube ad-
apter does not tilt.
Do not tighten the drawtube adapter with clam-
ping unit.
Fig. 43
8. Turn back the clamping unit until the arrows of the
balance marks are aligned.
The through-bore of the clamping element re-
ception and the threaded bores of the spindle
flange should now be aligned as well.
Depending on the machine type it may be ne-
cessary to comply with a given screw-in depth
of the drawtube adapter.

This dimension is pointed out in the assemb-
ly drawing of the clamping device.
WARNING!
Crushing danger due to machine move-
ment!
It may not always be avoided that in the as-
sembly of the clamping unit there is a gap bet-
ween spindle flange and clamping unit.
Therefor the reasons are the position of the
drawtube as well as the request to maximum
usable work space.
Through this gap there is a higher risk of crus-
hing that can lead to severe injuries.

Never reach into the gap between spindle
flange and clamping unit!
Order h49 7144.907-333 73