Hainbuch SPANNTOP NOVA, Руководство по установке

Страница: 75 / 112

SPANNTOP [nova] – Assembly
Fig. 46
6. Vertically suspended assembly:

Place the assembly plate [illustration is symbolic]
on the tool turret.

Use a crane to place the clamping unit with draw-
tube adapter on the assembly plate.

In jog mode, move the spindle slowly and care-
fully downward until it touches the clamping unit.
Fig. 47
7. Horizontal or vertical standing assembly:

Use a crane to lift the clamping unit with drawtu-
be adapter into the machine and place it on the
drawtube of the machine tool.
Fig. 48
8. Insert wrench [if necessary through the assembly
plate] into the clamping unit, so that the wrench
engages in the grooves of the adapter.
9. Use the wrench to screw the adapter onto the
drawtube of the machine, via the adapter thread,
to the stop, without tightening. In this process en-
sure that the drawtube adapter does not tilt.
Do not tighten the drawtube adapter with clam-
ping unit.
Fig. 49
10. Turn back the clamping unit until the arrows of the
balance marks are aligned.
The through-bore of the clamping element re-
ception and the threaded bores of the spindle
flange should now be aligned as well.
Order h49 7144.907-333 75