Hagie UpFront DTS 8T, Руководство оператора, Страница: 71 / 102

FIG 65-1
1
2
2
65
VI.
SERVICE AND MAINTENANCE
LUBRICATION
Leg Bearings
Hagie DTS 8T leg assemblies are constructed
with upper and lower nylon bearings for
suspension telescoping between the inner and
outer leg weldments. These bearings must be
lubricated to avoid bearing failure and ensure
optimal ride quality. There are grease zerks
located on the sides of the leg assemblies, one for
the upper bearing (fig. 65-1, item 1) and two for
the lower bearing (fig. 65-1, item 2). Greasing all
bearings on all four legs daily is very important.
In late season crop applications, the grease
may possibly be wiped off by passing crop leaves,
so the bearing should be greased at least twice a
day. Suggested times are in the morning and at
noon. If the crop is mature enough, or plant
population is high enough, more frequent leg
bearing grease application may be required. This
will ensure proper lubrication allowing optimal
performance.