Hagie UpFront DTS 8T, Руководство оператора, Страница: 37 / 102

IV.
OPERATING INFORMATION
B. Hydrostatic Drive System
31
Operating the Hydrostatic Drive
Four wheel drive
– To operate in four wheel drive,
as stated above, pull up on the control knob (fig. 31-2).
You may want to operate in four wheel drive when the
field and soil conditions are not ideal. While operating in
four wheel drive, you will have a higher torque, but a
lower speed.
It is not recommended that the machine be operated
in four wheel drive for extended periods of time or while
you are driving at higher speeds. Damage to the wheel
motors may occur.
FIG 31-1
1. Increase the engine RPM with the throttle lever (fig.
31-1, item 2) to the maximum recommended engine
speed setting.
2. To move forward, slowly push the hydrostatic control
lever (fig. 31-1, item 1) forward. The farther the con-
trol lever is moved, the faster the sprayer will travel.
To stop, slowly pull the lever to the “N” (neutral) posi-
tion.
3. To reverse the machine, slowly pull the hydrostatic
control lever back. To stop, slowly push the lever to
the “N” (neutral) position.
4. To engage the hydrostatic system in four wheel drive, pull up on the control knob (fig. 31-1, item 3). To
return to two wheel drive, push the control knob down.
Driving the machine-
FIG 31-1
3
1
2