Hagie UpFront DTS 8T, Руководство оператора, Страница: 27 / 102

IV.
OPERATING INFORMATION
A. CAB
21
Speedometer/Tachometer
PARAMETER SETTING
RPM ...................................... 357(fig. 21-1, item C)
MPH (320/85R34 tire) ......... 78.3(fig. 21-1, item D)
To change or re-enter the parameters, press
the desired button and hold in until the four “8’s”
are displayed. Release the button and the
parameter setting will appear. If you want to
increase the setting, press the RPM button. To
decrease, press the MPH button.
PROGRAMMING MPH - To program the MPH,
use the formula from figure 21-2. Example
(320/85R34 tires): 168 times Torque Hub
®
reduction of 25.59 times number of speedometer
ring pick-up sensors on sensor disc of 46 equals
197759.52 ;divided by front tire static loaded radius
of 25.8 inches equals 7665.1 ; 7665.1 divided into
600,000 equals parameter setting of 78.28 .
This parameter setting should be checked
when you receive your sprayer.
ADDITIONAL PARAMETERS – To access the
miscellaneous parameters screen (fig. 21-1, item
E), hold down both buttons at the same time until
the screen with four “8’s” appears.
Use the RPM buttons to scroll the parameter
settings (P3 = power-up display, P4 = signal track-
ing speed, P5 = input device). Use the MPH button
to change the setting of the displayed parameter
(either 0 or 1).
See the next page for more information.
The speed/tach unit is programmable with a
digital read-out indicating MPH or RPM. The
parameters have been factory set.
Turn the ignition key to the “ON” position. The
display will show “0000”, which indicates RPM.
Press the MPH button; the readout will display
“00.0” which indicates MPH.
To check the parameter settings, press the
desired button and hold until four “8’s” are shown,
then release (fig. 21-1, item B). The parameter
setting will be displayed for four seconds.
FIG 21-2
A = Torque-Hub
®
reduction
B = speedometer ring
pick-up
C = static loaded radius
Y = MPH parameter setting
C
168 x A x B
X
X
600,000
Y
FIG 21-3
speed
sensor
E
FIG 21-1
B
A
C
D