Hagie UpFront DTS 8T Скачать руководство пользователя страница 7

Страница: 7 / 102

Most accidents occur as the result of failure to

follow simple and fundamental safety rules. For this

reason, most accidents can be prevented by

recognizing the real cause and doing something

about it before the accident occurs.

Many

conditions

cannot

completely

safeguarded against without interfering with

efficient operation and/or reasonable accessibility.

SAFETY/DECALS

SAFETY PRECAUTIONS

Therefore, you must study this Operator’s Manual

and learn how to use the sprayer controls for safe

operation. Likewise, do not let anyone operate

without instruction.

not

make

modifications

such

weldments, add-ons, adaptations, or changes from

the original design of sprayer. Such changes and/

or modifications may become safety hazards to

you and to others and will void all warranties.

DRIVING

•

Before moving sprayer, make sure no persons or obstructions are in path of travel.

•

Do not permit passengers on sprayer when it is moving; they may fall off or obstruct

operator’s view.

•

Never drive near ditches, embankments, holes, mounds, or other obstacles.

•

Never drive on hills too steep for safe operation.

•

Always drive at a reasonable field speed.

•

Reduce sprayer’s speed before turning.

•

Come to a complete stop before reversing direction.

•

Pull over to side of road before stopping.

•

Additional weight caused from partially full or full solution tanks may cause erratic or

increased stopping distance. Do not drive on road with full tanks

•

Do not activate parking brake while machine is in motion or damage may occur to

sprayer.

•

Use flashing/hazard warning lights when traveling on public roads, day or night, unless

prohibited by local law.

•

Make sure SMV emblem is in place and visible from rear when traveling on public roads.

Содержание UpFront DTS 8T







































































































Результаты поиска

Содержание UpFront DTS 8T

Отзывы:

Hagie UpFront DTS 8T, Руководство оператора, Страница: 7 / 102

Результаты поиска

Содержание UpFront DTS 8T

Отзывы: