Hagie UpFront DTS 8T, Руководство оператора, Страница: 51 / 102

45
IV.
OPERATING INFORMATION
F. Spray System
Boom valve switches–
The
individual solution valves are turned on
and off with switches located on the side
console (fig. 45-1). The switches corre-
spond with the valves going from left to
right.
On the sixty foot boom, the first
switch is the left solution valve and so on.
The last two switches are not operational.
Remember that the directions (left and right) refer to the position of the operator while seated in the
operator seat facing forward!
FIG 45-1
Pressure gauge–
The pressure gauge (fig. 45-2) gives the
operator a constant visual display of the amount of solution being ap-
plied (measured in PSI). The pressure (as determined by the monitor
controlled butterfly valve) will vary according to ground speed. If you
are applying solution manually, the solution pressure gauge visually
informs the operator of needed manual adjustments.
FIG 45-2
Main solution switch–
The main solution switch is a floor-mounted
“dimmer-style” switch (fig. 45-3) . It controls the power supply to the console’s boom
solution valve switches. The main floor switch must be ON to supply the console
switches with voltage. This way you can turn all of the boom solution valves ON and
OFF al lat once in a hands-free execution such as turning the main solution switch
OFF as you arrive at the end rows of a field and turn it back ON as you enter the
field again.
When the main solution switch is ON a GREEN indicator light mounted at the bot-
tom of the instrument panel will light up (fig 4.5-4). When the light is not lit, the main solu-
tion switch is OFF.
FIG 45-3
FIG 45-4