hager
"DALI Gateway C00Cx2" software
Parameters
Seite 109 von 130
[x] Group (x = 1 … 32) The name of the group can be edited and will be displayed in the node..
Name
0 … 28 characters
Group
The group can be assigned a unique name
(e.g. “Office window side 1”. The project
name will be displayed in the group view in
the left plug-in window.
The name serves as a better orientation in
the plug-in. The name will not be
programmed into the device.
Minimum brightness
0,1 %
0,2 %
0,5 %
1 %
3 %
5 %
10 %
15 %
20 %
25 %
30 %
35 %
40 %
45 %
50 %
55 %
60 %
65 %
70 %
This parameter will set the minimum
brightness of the DALI group will be set.
The parameterized value will not be under-
run regardless of the operating state of the
Gateway.
•
The value to be set at this point cannot
exceed the parameterized maximum
brightness (minimum brightness <
maximum brightness).
•
During the editing of the minimum
brightness the ETS plug-in will check all
parameterized brightness values of the
group (e.g. switch-on brightness, scene
values etc.) to see whether the values
will fall below the minimum brightness. In
that case, the plug-in will report a conflict
of values and offers the following
option...
– the brightness values can be adjusted
to the minimum brightness or
– the setting of the minimum brightness
will be reset to the original value.
•
In case values are received via the
brightness value object that fall short of
the parameterized minimum brightness,
the Gateway will set the minimum
brightness as the new brightness value
for the affected group.