HAEMMERLIN 312175001, Инструкция по эксплуатации

Страница: 45 / 88

45
RENOVATION PLATFORM
The renovation platform can be used on inclined and vertical hoists.
It allows to transport materials of all kinds in a horizontal position for the fast supply of building sites, in front
of a window, a terrace, a balcony, a mezzanine, a landing, a scaffolding or any other opening of building.
A tipping adjustment cylinder allows the platform to be positioned horizontally with a variable slope from 40
to 90° from the horizontal axis.
When loading the platform, when the mobile equipment is located at the bottom of the hoist, the loading
height is about 1m above the ground.
This removes the need for the operator to bend over to place the load on the platform.
Thanks to the horizontal position of the platform, it is particularly easy to unload, as the operator pulls the
transported items into the building without having to bend over to pick up the load.
It is therefore the ideal solution for all interior and exterior renovation jobs.
Thanks to its compactness and light weight (aluminium structure), the renovation platform is very easy and
quick to install on the standard Maxial trolley. Its installation does not require any tools.
The side and rear panels can be opened for loading and unloading. Thanks to the sliding support arms, the
side panels can also be used in the horizontal position for the transport of long and bulky items. The side
panels and the fixed wall are equipped with handles that allow the transported items to be strapped down if
necessary. The opening rear side and the fixed front side are equipped with removable extensions for the
transport of very bulky items.
Care should always be taken to properly secure the materials being transported so that no part of the load
can fall off.
Attention, the renovation platform is not compatible with a knee joint!
INSTALLATION
We also remind you that during the assembly and disassembly operations, it is mandatory to wear
protective gloves and it strongly recommended to wear them throughout the duration of the work.
It is mandatory to wear a helmet and safety shoes for all persons present on the site, whether or not they
are involved in assembly or disassembly operations.
The work area around the plant must be kept clean and the danger zone must be physically marked off.
PREPARATION OF THE INCLINATION ADJUSTMENT CYLINDER OF THE RENOVATION PLATFORM
(fig.1):
- Insert the slides into the cylinder.
- Choose the position of the holes of the slides in relation to the cylinder, so that the renovation
platform can be positioned horizontally.
- Insert the shaft simultaneously through the cylinder and the slides.
- Lock the shaft with the pin.
The complete cylinder is ready for use (fig.2).
Installation of the standard trolley (fig.3):
Fig. 1 Fig. 2
Shaft
Cylinder
Slides
Clip