HAEMMERLIN 312175001, Инструкция по эксплуатации

Страница: 44 / 88

44
HORIZONTAL/VERTICAL SHEET CARRIER
The aluminium horizontal/vertical sheet carrier allows the transport of sheets, panels and joinery arranged
horizontally or vertically. It can be used vertically and inclined.
The adjustable retaining arms ensure the lateral and frontal lock of the transported sheets, panels and
joinery.
The sliding support supports sheets, panels and joinery when these exceed the height of the frame.
To adjust the position of the retaining arms, loosen the clamping knobs to release the arms, then position
the arms so that they block the sheets, panels and joinery on the sides and the front, then retighten the
knobs.
To adjust the position of the sliding support, loosen the clamping knobs to release the sliding support, then
position the sliding support so that the sheets, panels and joinery are supported by it, then retighten the
knobs.
Care should always been taken that the materials being transported are supported and properly secured so
that no part of the load can fall off.
Installation:
- Place the hooking shaft onto the top of the trolley and secure it with the pin.
- Attach the sheet carrier to the trolley (1-2) so that the hooks on the frame insert into the trolley's
previously installed hooking shaft.
- Insert the locking pins (3) on both sides of the trolley to ensure that the hooks are secure and the
sheet carrier cannot become unhooked and fall off.
Dimensions of the horizontal sheet carrier
1
1
2
2
3
3
MAX PAYLOAD
150kg