Haefely 2830 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 124

Haefely 2830 Скачать руководство пользователя страница 70

62

Software

Set Voltage

In this text field the AC test voltage can be set.

If  the  option  “Touch  screen”  is  set  in  the  sub  tab  sheet
Options  (see  9.3.4  Options)  a  voltage  input  dialog  will  be
opened.  The  info  text  on  the  right  side  will  be  displayed
where the range of the settable voltage is specified.

If the option “external” is selected then no voltage input dialog
will be opened. The voltage can be typed directly into the text
field.

If a voltage higher than 2 kV is set then a warning message
will pop up because the maximal AC voltage for the liquid
and solid Tettex test cells is 2 kV.

If a voltage out of range is set this info message will pop up.

Record

The actual selection of measured data will be stored in the
spreadsheet.

Only the following three states of the HV ON/OFF button are described here. The other buttons
are descried in the chapter 9.1.4 Basic Buttons.

HV Disabled

When the HV ON/OFF Button is disabled then no heater or test cell is
selected, the emergency button is pressed, one of the interlock
connectors are not connected or another measurement is running.

HV ON

This button state is used to switch ON the set voltage.

HV OFF

This button state is used to switch OFF the set voltage.

«
...
68
69
70
71
72
...
»

Содержание 2830





























































































































Отзывы:

Нет отзывов