Haefely 2830 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 124

Haefely 2830 Скачать руководство пользователя страница 44

36

Software

measurement results will be deleted. It is
recommended to make a new file or open an
existing one before the measurements start.
(see chapter 9.2 File Manager)

Beside the thermometer the current liquid
temperature (orange number) and the set
target temperature (see chapter 9.3.3 Heating
cell(s)) is displayed.

Hot Test Cell

When the test cell temperature is higher than
45 °C, then the cell color changes to red. Then
the cell should not be touched without a heat
protection means such as clothes.

During a Measurement

During  a  measurement  the  cell  symbol  is
disabled  but  not  the  heater  On/Off  button.
Additional a HV warning symbol appears. This
symbol  appears  during  AC  or  DC  HV  is
applied and also during a cell shorting phase.

Switch On/Off the Heater

By clicking on this button you can switch on
and off the heater.

The symbol indicates the current state of the
heater: A grey symbol means the heater is off
and a red symbol means the heater is running.

«
...
42
43
44
45
46
...
»

Содержание 2830





























































































































Отзывы:

Нет отзывов