4-11
Figure 4-14
Install an omni antenna on the AP directly
z
After the omni antenna is installed on the AP, the antenna should be at least one meter away from
the pole or other metal objects.
z
The outdoor AP and the feeder lightning arrester are each equipped with a 3-meter-long grounding
cable. If the length is not long enough, you need to supply longer grounding cables. For the
grounding requirements, refer to section “Grounding and Lightning Protection” on page 2-3.
Connecting External Cables
z
Before connecting external cables, check that all power lines are disconnected, and that there is no
dangerous voltage on the neutral (N) line.
z
Protect the AP and cables against water and avoid external cable damage.
External cables to be connected include an RF cable, Ethernet cable, fiber cable, grounding cable, and
power cord.
Connecting the RF cable
The RF cable refers to the cable between the antenna interface and the antenna. Follow these steps to
connect the RF cable:
Step1
Screw one end of the feeder lightning arrester onto the antenna interface.
