4-5
with an outer diameter of 60 to 110 mm (2.36 to 4.33 in) through the fixing support. The mounting plate
and the V-shaped bracket are fixed through the self-clinching bolt and a nut, as shown in Figure 4-5.
Figure 4-5
Mounting plate and V-shaped bracket
You can adjust the angle of the AP as needed. Follow these steps to adjust the angle of the AP:
Step1
Follow the arrowhead shown in Figure 4-6 to turn the V-shaped bracket with the self-clinching bolt as
the pivot to adjust the angle of the mounting plate.
Step2
Use tie-bar bolts through the guide slots and nuts (see Figure 4-8) to fix the mounting plat and V-shape
bracket.
Figure 4-6
Adjust the angle of the AP
On the top of a building, the outdoor AP is usually installed on a pole.
Follow these steps to install the outdoor AP on a pole:
Step3
As shown in Figure 4-7, fix the pole base onto the top surface of a building or onto a cement pier.
