4-4
Step
Operation
1
Put an anchor into each hole vertically.
2
Tap the flat end of the anchor with a rubber hammer until the anchor is flush with the wall
surface.
4) Fix the wall-mounting bracket
Step
Operation
1
Align the three holes in the wall-mounting bracket with the anchors and insert three
expansion screws through the installation holes into the anchors.
2
Adjust the position of the wall-mounting bracket and tighten the expansion screws.
5) Fix the AP
Step
Operation
1
Method 1: Align the two installation holes in the AP with the corresponding holes in the
wall-mounting bracket and then use two screws to fix them.
Method 2: Insert a screw into each installation hole in the AP, but do not tighten them. Then
insert the screws into the corresponding holes in the wall-mounting bracket.
2
Tighten the screws so that the AP touches against the wall-mounting bracket, as shown in
Figure 4-4.
Figure 4-4
Install the outdoor AP on a wall
Screw M6×12
Installing the AP on a pole
The fixing support for installing the outdoor AP on a pole consists of two major components: a pair of
V-shaped brackets and a mounting plate. The outdoor AP can be fixed on a vertical or horizontal pole
