H3C UniServer R2700 G3, Руководство пользователя

Страница: 65 / 226

6-29
Figure 6-41 Connecting the external VGA and USB 2.0 cable to the front media module
10.
Install the access panel. For more information, see " Installing the access panel ."
11.
Rack-mount the server. For more information, see " Rack-mounting the server ."
12.
Connect the power cord. For more information, see " Connecting the power cord ."
13.
Power on the server. For more information, see " Powering on the server ."
Installing the front media module for the 8SFF server and
10SFF server
1.
Identify the installation location. For more information, see "Front panel view."
2.
Power off the server. For more information, see " Powering off the server ."
3.
Remove the server from the rack. For more information, see " Removing the server from a rack ."
4.
Remove the security bezel, if any. For more information, see " Replacing the security bezel ."
5.
Remove the access panel. For more information, see " Removing the access panel ."
6.
Remove the front I/O module from the slot shared with the front media module, and then
remove the I/O component from the front I/O module. For more information, see "
Replacing the
front I/O component (8SFF/10SFF server) ."
Figure 6-42 Slot shared by the front I/O module and the front media module
7.
Install the removed front I/O component in the front media module, as shown in Figure 6-43 .
NOTE:
For simplicity, this figure does not show the front media module component.