H3C UniServer R2700 G3, Руководство пользователя

Страница: 116 / 226

7-33
Figure 7-38 Removing the rear 2SFF drive cage
9.
Remove the PCIe riser cards and PCIe modules, if any. For more information, see " Replacing a
riser card and a PCIe module ."
10.
Remove the mLOM Ethernet adapter, if any. For more information, see " Replacing an mLOM
Ethernet adapter ."
11.
Remove the NVMe VROC module, if any. For more information, see " Replacing an NVMe
VROC module ."
12.
Removed the DIMMs. For more information, see " Replacing a DIMM ."
13.
Remove the M.2 transfer module, if any. For more information, see " Replacing an M.2 transfer
module and a SATA M.2 SSD ."
14.
Remove the processors and heatsinks. For more information, see " Replacing a processor ."
15.
Remove the system board, as shown in Figure 7-39 :
a.
Loosen the two captive screws on the system board.
b.
Hold the system board by its handle and slide the system board toward the server front.
Then, lift the system board to remove it from the chassis.