H3C SR8800-F, Руководство по установке

Страница: 20 / 148

6
Figure 5 Installing the air filter (SR8805-F)
Mounting the router in the rack
WARNING!
•
Do not hold the handle of a fan tray or power supply, air vents, or the handle on the real panel to
move the router. Doing so might cause equipment damage or even bodily injury.
•
The router is heavy. As a best practice, use a mechanical lift to move it.
•
After placing the router on the slide rails, do not leave go of your hands immediately because this
might tip the router, damaging the router or even causing bodily injury.
To mount the router in the rack:
1. Move the chassis to face the rear of the chassis toward the front of the rack.
2. To lift the router, use a minimum of two persons or use a mechanical lift, if necessary. Lift the
router until the bottom of the router is a little higher than the slide rails on the rack.
3. Gently place the router on the slide rails. Slide the router along the slide rails until the mounting
brackets on the router touch the front rack posts, as shown by callout 1 in
Figure 6 .
4. Secure the chassis to the rack with screws shipped with the router.
1
2
1
3
3