H3C SR8800-F, Руководство по установке

Страница: 25 / 148

1
Installing FRUs
There is no required order for installing FRUs. As a best practice, connect power cords after
completing installing all required FRUs.
Keep the chassis and the component packages for future use.
Attaching an ESD wrist strap
The router is provided with an ESD wrist strap. To minimize ESD damage to electronic components,
wear an ESD wrist strap and make sure it is reliably grounded when installing modules.
To use an ESD wrist strap:
1. Make sure the router is reliably grounded. For how to ground your router, see "Grounding the
router."
2. Wear the wrist strap.
3. Tighten the wrist strap to keep good skin contact. Make sure the resistance reading between
your body and the ground is between 1 and 10 megohms.
4. As shown in Figure 1 , attach the ESD wrist strap to the chassis by either of the following
methods:

Insert the ESD wrist strap into the ESD socket on the chassis.

Attach the ESD wrist strap to the grounding post of the chassis with an alligator clip.
Figure 1 Attaching an ESD wrist strap (SR8805-F)
Installing MPUs/service modules
CAUTION:
Before installing a card in the chassis, make sure the connectors on the card are not broken or
blocked to avoid damaging the backplane.