280
Step Command
Remarks
3.
Configure the content of the
NAS-Port-ID attribute.
pppoe-server access-line-id
content
{
all
[
separator
] |
circuit-id
|
remote-id
}
By default, the NAS-Port-ID
attribute contains only the
circuit-id.
4.
Configure the NAS-Port-ID
attribute to include the BAS
information automatically.
pppoe-server access-line-id
bas-info
[
cn-163
]
By default, the NAS-Port-ID
attribute does not include the BAS
information automatically.
5.
Configure the PPPoE server
to trust the access line ID in
received packets.
pppoe-server access-line-id
trust
By default, the PPPoE server
does not trust the access line ID
in received packets.
6.
Configure the format that is
used to parse the circuit-id.
pppoe-server access-line-id
circuit-id parse-mode
{
cn-telecom
|
tr-101
}
The default mode is TR-101.
7.
Configure the transmission
format for the circuit-id.
pppoe-server access-line-id
circuit-id trans-format
{
ascii
|
hex
}
The default format is a string of
characters.
8.
Configure the transmission
format for the remote-id.
pppoe-server access-line-id
remote-id trans-format
{
ascii
|
hex
}
The default format is a string of
characters.
Enabling PPPoE users to come online despite the
PPPoE-NAT444 collaboration failure
If a card that supports NAT444 collaboration fails, the PPPoE-NAT444 collaboration fails. You can
use this command to enable IPv4 PPPoE users to come online despite the collaboration failure. For
more information about NAT444, see NAT in
Layer 3—IP Services Configuration Guide
.
Enabling IPv4 PPPoE users to come online despite the PPPoE-NAT444 collaboration failure
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a VT interface and
enter VT interface view.
interface virtual-template
number
N/A
3.
Enable IPv4 PPPoE users to
come online despite the
PPPoE-NAT444
collaboration failure.
ppp ip nat-fail online
By default, IPv4 PPPoE users
cannot come online if the
PPPoE-NAT444 collaboration
fails.
Enabling IPv6 PPPoE users to come online despite the PPPoE-NAT444 collaboration failure
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a VT interface and
enter VT interface view.
interface virtual-template
number
N/A
3.
Enable IPv6 PPPoE users to
come online despite the
PPPoE-NAT444
collaboration failure.
ppp ipv6 nat-fail online
By default, IPv6 PPPoE users
cannot come online if the
PPPoE-NAT444 collaboration
fails.