361
a.
Select
User Access Manager
>
Portal Service Management
>
Device
from the
navigation tree to open the portal device configuration page.
b.
Click
Add
.
c.
Enter the device name
NAS
.
d.
Enter the IP address of the router's interface connected to the host.
e.
Enter the key, which must be the same as that configured on the router.
f.
Set whether to enable IP address reallocation.
This example uses direct portal authentication, and therefore select
No
from the
Reallocate
IP
list.
g.
Select whether to support server heartbeat and user heartbeat functions.
In this example, select
Yes
for both
Support Server Heartbeat
and
Support User
Heartbeat
.
h.
Click
OK
.
Figure 123 Adding a portal device
4.
Associate the portal device with the IP address group:
a.
As shown in
, click the icon in the
Port Group Information Management
column
of device
NAS
to open the port group configuration page.
b.
Click
Add
.
c.
Enter the port group name.
d.
Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address
group.
e.
Use the default settings for other parameters.
f.
Click
OK
.
Figure 124 Device list
