85
No.
Attribute
Description
80 Message-Authenticator
Used for authentication and verification of authentication packets to
prevent spoofing Access-Requests. This attribute is present when EAP
authentication is used.
81 Tunnel-Private-Group-ID
Group ID for a tunnel session. To assign VLANs, the NAS conveys
VLAN IDs by using this attribute.
87
NAS-Port-Id
String for describing the port of the NAS that is authenticating the user.
Appendix C RADIUS subattributes (vendor ID 25506)
lists all RADIUS subattributes with a vendor ID of 25506. Support for these subattributes
depends on the device model.
Table 4 RADIUS subattributes (vendor ID 25506)
No. Subattribute
Description
1
Input-Peak-Rate
Peak rate in the direction from the user to the NAS, in bps.
2
Input-Average-Rate
Average rate in the direction from the user to the NAS, in bps.
3
Input-Basic-Rate
Basic rate in the direction from the user to the NAS, in bps.
4
Output-Peak-Rate
Peak rate in the direction from the NAS to the user, in bps.
5
Output-Average-Rate
Average rate in the direction from the NAS to the user, in bps.
6
Output-Basic-Rate
Basic rate in the direction from the NAS to the user, in bps.
15 Remanent_Volume
Total amount of data available for the connection, in different units
for different server types.
17
ISP-ID
ISP domain where the user obtains authorization information.
20 Command
Operation for the session, used for session control. Possible
values include:
•
1
—Trigger-Request.
•
2
—Terminate-Request.
•
3
—SetPolicy.
•
4
—Result.
•
5
—PortalClear.
25 Result_Code
Result of the Trigger-Request or SetPolicy operation, zero for
success and any other value for failure.
26
Connect_ID
Index of the user connection.
27 PortalURL
PADM
redirect
URL assigned to PPPoE users.
28 Ftp_Directory
FTP, SFTP, or SCP user working directory.
When the RADIUS client acts as the FTP, SFTP, or SCP server,
this attribute is used to set the working directory for an FTP,
SFTP, or SCP user on the RADIUS client.
29
Exec_Privilege
EXEC user priority.
32 NAT-IP-Address
Public IP address assigned to the user when the source IP
address and port are translated.
33 NAT-Start-Port
Start port number of the port range assigned to the user when the
source IP address and port are translated.
