411
Step Command
Remarks
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Enable IPoE
access-out
authentication.
•
Enable IPoE access-out
authentication for IPv4 users:
ip subscriber access-out
•
Enable IPoE access-out
authentication for IPv6 users:
ipv6 subscriber access-out
By default, IPoE access-out
authentication is disabled.
Setting the traffic statistics update timer for IPoE
sessions
You can set the traffic statistics update timer for IPoE sessions based on the statistic frequency
requirement.
To set the traffic statistic update timer for IPoE sessions:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the traffic statistics
update timer for IPoE
sessions.
•
Set the traffic statistics update
timer for IPv4 IPoE sessions:
ip subscriber timer traffic
•
Set the traffic statistics update
timer for IPv6 IPoE sessions:
ipv6 subscriber timer traffic
By default, the traffic statistics
update timer for IPoE sessions is
180000 milliseconds.
Enabling logging for IPoE users
The IPoE logging feature enables the device to generate IPoE logs and send them to the information
center. Logs are generated after a user comes online, goes offline, or fails to come online. A log entry
contains information such as the username, IP address, interface name, inner VLAN, outer VLAN,
MAC address, and failure causes. For information about the log destination and output rule
configuration in the information center, see
Network Management and Monitoring Configuration
Guide
.
As a best practice, disable this feature to prevent excessive IPoE log output.
To enable logging for IPoE users:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable logging for
IPoE users.
•
Enable logging for IPv4 IPoE
users:
ip subscriber access-user log
enable
[
successful-login
|
failed-login
|
logout
] *
•
Enable logging for IPv6 IPoE
users:
ipv6 subscriber access-user
log enable
[
successful-login
|
failed-login
|
logout
] *
By default, logging is disabled for
IPoE users.
