Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-20
6.4.2 Upgrading an Application Using TFTP Through Command Lines
1)
Set up a TFTP upgrade environment.
z
Firewall serves as the TFTP client, and PC serves as the TFTP server.
z
For the procedure of setting up an upgrade environment, refer to step 1 in section
6.4.1 “Upgrading an Application Using TFTP on the BootWare Menu” on page
z
Run the terminal emulation program on the PC, and then configure the IP
addresses of the client and sever to be on the same network segment. In this
example, the IP address of the server is 192.168.80.200, and that of
GigabitEthernet 0/0 on the client is 192.168.80.10.
z
You can use the
ping
command to check whether the connection is successful.
Caution:
You can upgrade the application programs of the F1000-E through GigabitEthernet 0/0
only.
2)
View the files saved in the storage medium and its available space.
Use the
dir
command on the console terminal to view the files contained in the current
file system, and the available space of the storage device.
<H3C>dir
<H3C>dir
Directory of cfa0:/
0 -rw- 10867848 Jun 13 2007 13:21:20 main.bin
1 -rw- 4722 Jun 26 2007 12:55:42 config.cfg
2 -rw- 1128 Jun 27 2007 11:07:24 startup.cfg
3 -rw- 10129712 Jun 27 2007 10:26:02 update.bin
4 drw- - Jun 02 2007 18:28:14 logfile
62472 KB total (41855.5 KB free)
File system type of cfa0: FAT16
<H3C>
