Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-12
Enter Your Choice(0-5):
Select a proper baud rate. For example, select
5
for a baud rate of 115200 bps and the
system displays the following information:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
At this time, the baud rate of the serial interface of the firewall is modified to 115200 bps,
while that of the terminal is still 9600 bps. The firewall and the terminal cannot
communicate with each other. Therefore, you need to make the baud rate on the
terminal consistent with that on the firewall.
Perform the following operations on the terminal:
Figure 6-2
Disconnect the terminal
Select
File
>
Properties
, and then click
Configure…
to change the bits per second to
115200.
Figure 6-3
Modify the baud rate on the terminal
