Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-32
Enter your choice(0-4):
You can set the file type to M (main) or B (backup) or cancel the setting by selecting
1
to
4
. For details of each type of files, refer to section 6.1 “Overview” on page 6-1.
II. Setting application file type through the CLI
# Change the type of f1000e.bin from B to M+B.
<H3C> boot-loader file f1000e.bin main
This command will set the boot file of the specified board. Continue? [Y/N]:
The specified file will be used as the main boot file at the next reboot!
By now, the type of f1000e.bin has been changed to M+B, and the file has become the
main application file for the next startup. If there was an M type of application file, the
type of that file was automatically changed to N.
Note:
For details about the
boot-loader
command, refer to
H3C SecPath Series Security
Products User Manual
.
6.6.3 Deleting a File
I. Deleting a file on the BootWare menu
Select
3
on the file control submenu, and the system displays:
Deleting the file in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE
=============================================================
NO. Size(B) Time Type Name
1 10129712 Apr/11/2007 05:39:50 B cfa0:/main.bin
2 1227 May/11/2007 16:25:52 N/A cfa0:/startup.cfg
3 2294 May/11/2007 14:47:32 N/A cfa0:/~/startup.cfg
4 2094 May/11/2007 13:47:34 N/A cfa0:/~/startup_bac.cfg
0 Exit
=============================================================
Enter file no:
Enter the file number, select
4
, and the system prompts:
The file you selected is cfa0:/~/startup_bac.cfg,Delete it? [Y/N]
Select
Y
, and the system displays the following information:
Deleting.........
Done!
