Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-18
Caution:
z
The TFTP Server software is not included in the F1000-E firewall package. You
need to purchase and install it by yourself,
z
You can upgrade the applications of the F1000-E through GigabitEthernet 0/0 only.
2)
Configuring Ethernet interface parameters on the BootWare menu.
Enter the BootWare main menu and select
3
to enter the Ethernet submenu, where you
can select
5
to enter the Ethernet Parameter Set menu to set the Ethernet parameters.
==================<ETHERNET PARAMETER SET>===================
Note: '.' = Clear field.
'-' = Go to previous field.
Ctrl+D = Quit.
=============================================================
Protocol (FTP or TFTP):tftp
Load File Name :main.bin
Target File Name :main.bin
Server IP Address :192.168.80.200
Local IP Address :192.168.80.10
Gateway IP Address :
FTP User Name :
FTP User Password :
Table 6-7
Description on the display information of setting Ethernet interface
parameters
Display information
Description
'.' = Clear field
Shortcut key
.
is used to clear the current input.
'-' = Go to previous field
Shortcut key
-
is used to return to the previous field.
Ctrl+D = Quit
Shortcut key
Ctrl+D
is used to quit the parameter
setting page.
Protocol (FTP or TFTP)
Choose to upgrade application programs using
TFTP/FTP
Load File Name
Name of the download file, which needs to be the
same with that of the actual file to be downloaded.
At the same time, you need to set the download path
in TFTP/FTP.
Target File Name
Name of the target file after the file is downloaded to
the firewall. The extension of the target file needs to
be same with that of the downloaded file.
