Installation Manual
H3C SecPath F1000-E Firewall
Chapter 2 Interface Modules
2-4
2.2.2 Interface Numbering
The interfaces of the F1000-E firewall are numbered as per the following rule:
1)
An interface is numbered in the form of
interface-type X/Y
.
z
interface-type
: Interface type, such as GigabitEthernet.
z
X
: Slot number, representing the slot where the module is inserted.
z
Y
: Interface number, that is, the sequence number of the interface on the module.
2)
Different interfaces on a module share the same slot number X.
3)
For each type of interfaces, Y starts from 0 and is incremented from left to right on
the interface module.
2.2.3 Examples
1) The fixed optical/electrical interfaces on the F1000-E firewall are numbered as
follows:
z
GigabitEthernet 0/0
z
GigabitEthernet 0/1
z
GigabitEthernet 0/2
z
GigabitEthernet 0/3
2)
If slot 1 and slot 2 on the F1000-E each are installed with an HIM-4GBE module,
the GigabitEthernet interfaces are numbered as:
z
Slot1: GigabitEthernet 1/0, GigabitEthernet 1/1, GigabitEthernet 1/2 and
GigabitEthernet 1/3.
z
Slot2: GigabitEthernet 2/0, GigabitEthernet 2/1, GigabitEthernet 2/2 and
GigabitEthernet 2/3.
