43
To do…
Use the command…
Remarks
Configure the output rules of
the system information
info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number
|
channel
-
name
} [
debug
{
level
severity
|
state
state
} * |
log
{
level
severity
|
state
state
} * |
trap
{
level
severity
|
state
state
}
* ] *
Optional
See “
Default output rules of system
Specify the source IP address
for the log information
info-center loghost source
interface-type interface-number
Optional
By default, the source interface is
determined by the matched route, and the
primary IP address of this interface is the
source IP address of the log information.
Configure the format of the
time stamp for system
information output to the log
host
info-center timestamp
loghost
{
date
|
iso
|
no-year-date
|
none
}
Optional
date
by default.
Set the format of the system
information sent to a log host
to UNICOM
info-center format unicom
Optional
H3C
by default.
Specify a log host and
configure the related output
parameters
info-center loghost
{
host-ipv4-address
|
ipv6
host-ipv6-address
} [
port
port-number
] [
channel
{
channel-number
|
channel-name
} |
facility
local-number
] *
Required
By default, the system does not output
information to a log host. If you specify to
output system information to a log host,
the system uses channel 2 (loghost) by
default.
The value of the
port-number
argument
should be the same as the value
configured on the log host, otherwise, the
log host cannot receive system
information.
Outputting system information to the trap buffer
NOTE:
The trap buffer receives the trap information only, and it discards the log and debugging information even
if you have configured to output them to the trap buffer.
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number
name
channel-name
Optional
See
for default channel names.