H3C S3100V2-52TP, Руководство по настройке, Страница: 182 / 224

170
Task Remarks
Manually collecting topology information Optional
Enabling the cluster function Optional
Establishing a cluster Required
Enabling management VLAN auto-negotiation Required
Configuring communication between the management switch
and the member switches within a cluster
Optional
Configuring cluster management protocol packets Optional
Cluster member management Optional
Enabling NDP Optional
Enabling NTDP Optional
Manually collecting topology information Optional
Enabling the cluster function Optional
Configuring the
member switches
Deleting a member switch from a cluster Optional
Configuring access between the management switch and its member switches Optional
Adding a candidate switch to a cluster Optional
Configuring topology management Optional
Configuring interaction for a cluster Optional
SNMP configuration synchronization function Optional
Configuring advanced
cluster management
functions
Configuring web user accounts in batches Optional
CAUTION:
• Disabling the NDP and NTDP functions on the management switch and member switches after a cluster
is created will not cause the cluster to be dismissed, but will influence the normal operation of the cluster.
•
In a cluster, if a member switch enabled with the 802.1X or MAC address authentication function has
other member switches connected to it, you must enable HW Authentication Bypass Protocol (HABP)
server on the switch. Otherwise, the management switch of the cluster cannot manage the switches
connected with it. For more information about the HABP, see
Security Configuration Guide.
•
If the routing table of the management switch is full when a cluster is established, that is, entries with the
destination address as a candidate switch cannot be added to the routing table, all candidate switches
will be added to and removed from the cluster repeatedly.
•
If the routing table of a candidate switch is full when the candidate switch is added to a cluster, that is,
the entry with the destination address as the management switch cannot be added to the routing table,
the candidate switch will be added to and removed from the cluster repeatedly.
Configuring the management switch
Enabling NDP globally and for specific ports
For NDP to work normally, you must enable NTDP both globally and on specific ports.