H3C S3100V2-52TP Скачать руководство пользователя страница 103

Страница: 103 / 224

To do…

Use the command

Remarks

quit

Configure the reflector port
for the remote source

mirroring group

mirroring-group

group-id

reflector-port

reflector-port

Required
By default, no reflector port is

configured for a mirroring group.

Create the remote probe
VLAN and enter VLAN view

vlan

vlan-id

Required
By default, no remote probe VLAN is

configured for a mirroring group.

Assign monitor ports to the
remote probe VLAN

port

interface-list

Required
By default, a newly-created VLAN
does not have any member port.

Return to system view

quit

—

Configure the remote probe
VLAN for the remote source
mirroring group

mirroring-group

group-id

remote-probe vlan

rprobe-vlan-id

Required
By default, no remote probe VLAN is

configured for a mirroring group.

NOTE:

•

The reflector port of a remote source mirroring group must be an access port and belong to the default
VLAN, VLAN 1.

•

H3C recommends that you configure an unused port as the reflector port of a remote source mirroring
group and disable STP on it.

•

Do not configure a combo interface as a reflector port.

•

A mirroring group can contain multiple source ports.

•

To make sure that the port mirroring function works properly, do not assign a source port to the remote
probe VLAN.

•

If you have already configured a reflector port for a remote source mirroring group, you can no longer
configure an egress port for it.

•

A VLAN can serve as the remote probe VLAN for only one remote source mirroring group. H3C
recommends you use the remote probe VLAN for port mirroring exclusively. Do not create a VLAN

interface for the VLAN or configure any other features for the VLAN.

•

A remote probe VLAN must be a static VLAN. To remove the VLAN configured as a remote probe
VLAN, you must first remove the remote probe VLAN with the

undo mirroring-group remote-probe

vlan

command.

•

If the remote probe VLAN of a remote mirroring group is removed, the remote mirroring group will
become invalid.

•

The link type of monitor ports configured for port mirroring must be access.

Configuring Layer 2 remote port mirroring

Layer 2 remote port mirroring configuration task list

Configuring Layer 2 remote port mirroring is to configure remote mirroring groups. To do that, configure

the remote source group on the source device and configure the cooperating remote destination group

Содержание S3100V2-52TP

































































































































































































































Результаты поиска

Содержание S3100V2-52TP

Отзывы:

H3C S3100V2-52TP, Руководство по настройке, Страница: 103 / 224

Результаты поиска

Содержание S3100V2-52TP

Отзывы: