131
To do…
Use the command…
Remarks
Configure the destination
address of probe packets
destination ip
ip-address
Required
By default, no destination IP address is
configured.
Configure the source IP
address of probe packets
source ip
ip-address
Optional
By default, no source IP address is specified.
The source IP address must be the IP address of a
local interface. The local interface must be up;
otherwise, no probe packets can be sent out.
Configure optional
parameters
See “
”
Optional
Configuring the collaboration function
Collaboration is implemented by establishing reaction entries to monitor the detection results of a test
group. If the number of consecutive probe failures reaches the threshold, the configured action is
triggered.
Follow these steps to configure the collaboration function:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter NQA test group view
nqa
entry
admin-name
operation-tag
—
Enter test type view of the test
group
type
{
dhcp
|
dlsw
|
dns
|
ftp
|
http
|
icmp-echo
|
snmp
|
tcp
|
udp-echo
}
The collaboration function is not
supported in UDP jitter and voice
tests.
Configure a reaction entry
reaction
item-number
checked-element
probe-fail
threshold-type consecutive
consecutive-occurrences
action-type
trigger-only
Required
Not created by default.
You cannot modify the content of
an existing reaction entry.
Exit to system view
quit
—
Configure a track entry and
associate it with the reaction entry
of the NQA test group
track
entry-number
nqa entry
admin-name
operation-tag
reaction
item-number
Required
Not created by default.
Configuring threshold monitoring
Configuration prerequisites
Before you configure threshold monitoring, complete the following tasks:
•
Configure the destination address of the trap message by using the
snmp-agent target-host
command. For more information about the
snmp-agent target-host
command, see
Network
Management and Monitoring Command Reference
.
•
Create an NQA test group and configure the related parameters.