1-22
SFP+ Interface Status LED
The port mode LED and the SFP+ interface status LED together indicate the SFP+ interface operation
status. For details, refer to
Table 1-17
.
Table 1-17
SFP+ interface status LEDs description
Status
Port mode
LED
SFP+ interface
status LED
Description
Steady green
The port operates at a rate of 10 Gbps; the LED is fast flashing
when data is being sent and/or received on the port.
Steady yellow
The port operates at a rate of 1 Gbps; the LED is fast flashing
when data is being sent and/or received on the port.
Flashing yellow
(3 Hz)
POST failed on the port.
Steady green
(rate mode)
Off
No link is present on the port.
Steady green
The port operates in full-duplex mode; the LED is fast flashing
when data is being sent and/or received on the port.
Flashing yellow
(3 Hz)
POST failed on the port.
Steady yellow
(duplex mode)
Off
No link is present on the port.
Management Ethernet Port Status LED
The S5800-32F provides two management Ethernet port status LEDs (LINK and ACT) on its rear panel.
Table 1-18
describes the status LEDs.
Table 1-18
The S5800-32F management Ethernet port status LEDs description
Mark
Status
Description
Off
The management Ethernet port is not connected.
LINK
Steady green
The management Ethernet port operates at a rate of
10/100/1000 Mbps.
Off
The management Ethernet port is not receiving or sending data.
ACT
Flashing yellow
The management Ethernet port is receiving or sending data.
OAP Card Status LED
The S5800-60C-PWR provides one OAP card status LED (SLOT3) on its front panel. For details, refer
to
Table 1-19
.
