1-13
Management Ethernet Port
The S5800-32F provides a management Ethernet port on its rear panel. The port connects to a
computer to perform system program loading and debugging without being affected by the switching
chip working status; or connects to a remote network management station (NMS) to implement remote
management of the system.
Table 1-3
S5800-32F management Ethernet port specifications
Item
Specification
Connector type
RJ-45
Connector quantity
1
Port transmission rate
10/100/1000 Mbps half duplex, full duplex
Transmission medium and
maximum transmission distance
Category-5 twisted pair cable, with a maximum transmission
distance of 100 m (328.1 ft.)
Function and service
Host software and Boot ROM upgrade, network management
USB Interface
Each S5800 series provides a USB2.0 interface compliant with the OHC standard on the front panel.
The USB interface supports an upload and download speed of 12 Mbps. With this USB interface, you
can access the file system on the flash of the switch to upload or download application and
configuration files.
10/100/1000Base-T Ethernet Port
Each S5800 series (except the S5800-32F) provides 10/100/1000Base-T Ethernet ports on its front
panel.
Table 1-4
describes the specifications of the 10/100/1000Base-T Ethernet ports.
Table 1-4
S5800 series 10/100/1000Base-T Ethernet port specifications
Item
Specification
Connector type
RJ-45
Interface standard
z
10 Mbps, full duplex
z
100 Mbps, full duplex
z
1000 Mbps, full duplex
z
MDI/MDI-X, auto-sensing
Max transmission
distance
100 m (328.1 ft.)
Transmission medium
Category-5 unshielded twisted pair cable
Standard
IEEE 802.3i, 802.3u, 802.3ab
100/1000Base-X SFP Interface
The S5800-60C-PWR/S5800-32F provides 100/1000Base-X SFP interfaces on its front panel. You can
select the FE or GE SFP transceivers described in
Table 1-5
.
