h/p/cosmos 190/65 3p Скачать руководство пользователя страница 149

Страница: 149 / 176

accessories & options

file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc

[10.L3]

Change from reverse to forward rotation

Turn the key-operated switch and start the machine without a subject on the running belt only when the belt is

not moving.

Observe the belt position for 2 minutes and correct the belt position with the belt adjustment screw (see

chapter maintenance and belt adjustment). It is normal, that after changing the belt rotation, the belt will move

to one side and therefore the running belt needs to be readjusted.

Once the belt is readjusted, STOP the belt and operate the machine with the subject on the belt.

In most cases the readjustment of the running belt requires the same revolutions of the belt adjustment screw.

Therefore we recommend to note the required revolutions of the belt adjustment screw. This will help to avoid the

waiting time and can reduce the belt adjustment procedure to some seconds effort.

[10.M]

Bottle holder

The bottle holder is available for all h/p/cosmos running machines and

can be easily fixed with a clamp on the handrail. The position of the

bottle holder must not be at the rear end of the handrail due to this end

must be reachable for the subject.

bottle holder for handrail 60mm [cos11020]

[10.N]

Retrofitting UserTerminal

All lt-models can be retro-fitted with a UserTerminal. h/p/cosmos

oversized running machines, which are equipped with an external control

unit, can be complemented optionally with an additional UserTerminal at

the handrail.

In this case the external UserTerminal is connected via interface to the

running machine. To connect other devices, e.g. PC or ECG, an

additional interface at the running machine is necessary.

Retrofitting UserTerminal [cos00098110047]

Mounting for retro-fitting UserTerminal at handrail [cos13514]

[10.O]

Monitor / laptop arm

A movable monitor and laptop arm for the external control unit

of the oversize running machines h/p/cosmos saturn and

h/p/cosmos venus is optionally available. Using this arm, the

monitor also can be turned in the field of vision of the athlete or

patient.

Monitor arm (movable) for PC monitor or Laptop

[cos13321]

Laptop computer [cos13476]

Содержание 190/65 3p

















































































































































































Результаты поиска

Содержание 190/65 3p

Отзывы:

h/p/cosmos 190/65 3p, Руководство по эксплуатации и обслуживанию, Страница: 149 / 176

Результаты поиска

Содержание 190/65 3p

Отзывы: