![background image](http://html.mh-extra.com/html/h-p-cosmos/170-190-65-series/170-190-65-series_original-instructions-for-use_574520054.webp)
1
4
.6 Safety inspection
In order to maintain the safety of the device, h/p/cosmos prescribes performance of an annual safety inspection.
Refer to the date on the inspection sticker on your device for the next inspection date.
h/p/cosmos bases the annual safety inspection on German laws and regulations.
It is the operator’s responsibility to comply with national laws and regulations.
Inspection intervals for optional equipment and accessories may deviate.
After 12 months or 5000 km there will be a safety inspection reminder (see below).
The error message will be reset by the h/p/cosmos service personnel performing the safety inspection.
A maintenance work and/or safety check cannot guarantee the safety of a device. It is only a statement of the visible and measurable
parameters and conditions at the moment of the measurement.
1
4
.7 Spare parts and consumables
Spare parts must only be replaced by qualified h/p/cosmos service personnel.
Information about spare parts is available at
.
A list of consumables is included in the accompanying documents.
Further information on consumables and spare parts: https://www.hpcosmos.com/en/products/service
1
4
.5 Issues for qualified service personnel
All maintenance work that is not explained in detail, must not be performed by the operator.
Safety inspections, installation and repair work, must also not be performed by the operator.
This kind of work must be performed by h/p/cosmos service personnel according to the “h/p/cosmos service instructions”.
The “h/p/cosmos service instructions” are available at
.
❚
170-190/65 MCU 6
Copyrigth: h/p/cosmos sports & medical gmbh
operation manual: cos105000_170-190_65_en rev. 1.05 dated 22.09.2021
page 54 of 97