❚
❚
Do not turn around, walk sideways or backwards; do not jump on or off the running belt while it is in motion.
❚
Do not touch the running belt while it is in motion (besides contact with feet).
❚
Do not lean on the UserTerminal - do not apply pressure to the displays - press keys softly.
❚
Ensure assist mean, accessories, cables etc. do not extend into the running area.
❚
Do not insert any object (especially no metal objects such as a pin or a wire) into any gap or any outlet on the device.
❚
Do not touch the subject and external electrical devices at the same time.
❚
Always the latest command will be executed, regardless of whether it came via interface or from the UserTerminal during one of
the four modes. Only stop command has higher priority and cannot be overwritten.
❚
Be aware that electromagnetic interferences may cause a fail-safe mode, the running belt will stop with a pre-defined deceleration
ramp.
❚
WARNING: To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth.
❚
WARNING: Do not use portable high frequency communication devices in the subject environment (see “position of subject
and user”). Disregard can cause loss of performance.
❚
Free standing equipment has to be installed on a stable and levelled base.
❚
Choose proper floor, shoes, clothing and humidity, in order to prevent electrostatic charge and discharge (also see technical data).
❚
Do not use the device without instruction by authorized personnel acc. to the instruction protocol.
❚
Regard safety area behind device of 2.0 m x width of treadmill.
❚
Operator and subject have to be aware of automatic load changes during profile, cardio and test mode.
❚
Unmeant trapping hazards: Take off ties, scarfs or other clothes that may be trapped. Secure long hair and ribbons during
maintenance and training in order to prevent being captured in trapping zones.
❚
Perform a daily visual inspection (see chapter “maintenance”).
❚
Obey the maintenance intervals claimed in chapter “maintenance”.
❚
Obey the competences claimed in chapter “maintenance”.
❚
A second person has to be present during maintenance.
❚
In case of any visible or assumed defects or malfunctions (of the device, accessories, software, etc.), unplug device, exclude
reconnection, mark clearly and inform h/p/cosmos service personnel via telephone and writing.
❚
In case of any visible or assumed wear and tear (of the device, accessories, labels, etc.), unplug device, exclude reconnection,
mark clearly and inform h/p/cosmos service personnel via telephone and writing. Do not change or remove any labels!
❚
In case of any fluid entering into the device, unplug device, exclude reconnection, mark clearly and inform h/p/cosmos service
personnel via telephone and writing.
❚
Do not modify the device, configurations, accessories or software in any way.
❚
Do not connect any devices, accessories or software, not listed in “accessories / compatible devices”.
❚
Disinfect the device before and after every treatment.
❚
Disconnect the device and all accessories from mains power supply before cleaning or disinfection.
❚
Do not save personal data (names, address, etc.) or patient data (indications, etc.) on the UserTerminal, for example in file names
or profile names.
med
❚
150/50 LC 150/50 150/50 new 170-190/65 200-300/75-125 emotion MCU6
Copyrigth: h/p/cosmos sports & medical gmbh
operation manual: cos105000_170-190_65_en rev. 1.05 dated 22.09.2021
page 17 of 97