GUTMANN mega macs 42 SE Bike Скачать руководство пользователя | Manualshive

Страница: 8 / 53

background image

User Information

mega macs 42 SE Bike

Safety Precautions

2.1.3

Safety Precautions for the mega macs 42 SE Bike

To prevent incorrect handling and consequent injuries to the user or damage to the device,
observe the following:

•

Only connect original mains supply to the power cord (supply voltage 12 V).

•

Protect the LC display and the device from prolonged exposure to solar radiation.

•

Protect the device and the connecting cable from hot components.

•

Protect the device and the connecting cables from rotating parts.

•

Regularly check the connecting cables/accessory parts for damage (destruction of the device
due to short circuit).

•

Connect the device exclusively according to user manual.

•

Keep the device away from fluids such as water, oil or gasoline. The mega macs 42 SE Bike is
not waterproof.

•

Protect the device from strong impacts and do not drop it.

•

Do not open the device on your own. Only technicians authorized by Hella Gutmann are
allowed to open the device. Warranty and guarantee will be rendered void at any case of
unauthorized tampering of the device or if the protective seal is damaged.

•

If the device malfunctions, contact Hella Gutmann or a Hella Gutmann trading partner without
delay.

2.1.4

Safety Precautions for High Voltage/Line Voltage

Very high voltages occur in electrical systems. Due to voltage flashover on damaged components,
such as marten damage or touching live components, the risk of electric shock is likely. High
voltage via the vehicle and line voltage via the building's mains supply can cause severe injury or
even death if adequate care is not taken. Therefore regard the following:

•

Only use power supply cables with grounding contact.

•

Only use a checked or the attached power cord.

•

Always use the original cable set.

•

Regularly check cables and adapters for damage.

•

Always connect the ground cable from device to vehicle first.

•

Perform any assembly work such as the connection of the device to the vehicle or the
replacement of components only when ignition is switched off.

•

Do not touch live components when ignition is switched on.

2.1.5

Safety Precautions – Chemical Burns

Escape of the liquid crystals due to a damaged LC display can cause chemical burn. Therefore
regard the following:

•

Immediately rinse affected parts of the body or clothing with water (consult a doctor).

•

Seek medical attention immediately after inhaling or swallowing.

8

«
...
6
7
8
9
10
...
»

Содержание mega macs 42 SE Bike






















































Отзывы:

Нет отзывов

Похожие инструкции для mega macs 42 SE Bike

Бренд: ReelCraft Страницы: 9

Бренд: Gibson Страницы: 2

ARCHITECT KGSS907

Бренд: KitchenAid Страницы: 56

Бренд: Pfaff Страницы: 14

Бренд: EHEIM Страницы: 180

Бренд: Avanti Страницы: 20

Бренд: Western Страницы: 16

Simco-Ion AEROSTAT Sentry

Бренд: ITW Страницы: 26

ZC-BWT8000 series

Бренд: Ganz Страницы: 2

Бренд: Ganz Страницы: 2

ZC-BT8000 Series

Бренд: Ganz Страницы: 2

Бренд: PIRASTRO Страницы: 36

Бренд: dacell Страницы: 12

Бренд: QNN Safe Страницы: 4

Бренд: Hanwei Страницы: 20

Бренд: Olin Страницы: 29

Бренд: DigiTech Страницы: 266

Бренд: KRAM telecom Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды