GUTMANN mega macs 42 SE Bike, Руководство пользователя

Страница: 41 / 53

mega macs 42 SE Bike Working with the Device
Diagnostics
2. Insert the DT VCI into the vehicle's diagnostic connector.
Both LEDs of the DT VCI flash. The DT VCI is ready for operation.
3. Select and confirm >Service reset< .
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
• Functions
• Assemblies
• Systems
• Data
4. Select and confirm the requested service reset.
5. Observe the information and instructions windows.
6. Follow the instructions on the screen.
7. Confirm the performed service reset with ENTER .
7.3.6.2 Performing Automatic Service Resets
Proceed as follows to perform the automatic service reset:
1. Perform steps 1 to 5 as described in the section Vehicle selection (Page 32) .
CAUTION
Rolling of vehicle
Risk of injury or material damage
Proceed as follows before starting:
1. Prevent the vehicle from rolling.
2. No gear is engaged.
3. Regard the window with infos and instructions.
NOTICE
Short circuit and voltage peaks when connecting the DT VCI
Danger of destruction of automotive electronics
Switch off ignition before connecting the DT VCI to the vehicle.
2. Insert the DT VCI into the vehicle's diagnostic connector.
Both LEDs of the DT VCI flash. The DT VCI is ready for operation.
3. Select and confirm >Service reset< .
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
• Functions
• Assemblies
• Systems
• Data
4. Select and confirm the requested system.
5. Regard the window with infos and instructions.
41