GUTMANN mega macs 42 SE Bike, Руководство пользователя

Страница: 44 / 53

Working with the Device mega macs 42 SE Bike
Diagnostics
3. Select and confirm >Basic settings< .
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
• Functions
• Assemblies
• Systems
• Data
4. Select and confirm the requested assembly.
5. Select and confirm further sub-categories where necessary.
6. Regard the window with infos and instructions.
7. Confirm the window with infos and instructions with ENTER .
Communication to vehicle is being established.
8. Regard the window with infos and instructions.
9. Confirm the window with infos and instructions with ENTER .
Communication to vehicle is being established. Basic settings are made automatically.
The message Basic setting successfully done. appears if the basic setting was successful.
7.3.8 Codings
Here you can code components and ECUs. Codings are necessary, if components were replaced or additional functions
in an electronic system must be activated.
7.3.8.1 Performing Manual Coding Procedures
WARNING
The ECU is not coded or is incorrectly coded
Risk of death or serious injury as a result of the ECU not working or working incorrectly
Material damage of the vehicle or the ambient area
Regard the following when performing coding procedures:
• Some working procedures require a specific training, e.g., working on the airbag.
• Regard the window with infos and instructions.
Proceed as follows to perform manual coding:
44