Guntermann & Drunck DVI-Vision-IP, Инструкция по установке и эксплуатации

Страница: 94 / 148

Establishing a KVM-over-IP™ connection for the first time
17 · G&D DVI-Vision-IP
4. Enter the following data under Main Network :
5. Press F2 to save your settings.
Configuring a KVM-over-IP connection
The
IP address
of the user module (host) as well as the
control port
of the computer
module must be specified to establish a
KVM-over-IP
connection through the com-
puter module.
The configuration of both the
communication ports
and the
data ports
are automatically
exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
Ctrl
+
Num
to open the OSD of computer module.
2. Select the entry
KVM connection
and press
Enter
.
3. Enter the following data under
Network setting
:
4. Press F2 to save your settings.
Global
preferences:
Press
F8
to select the global preferences:

Static: uses static settings.
 DHCP:
obtains settings from a DHCP server.
Hostname: Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS 1: Enter the IP address of the DNS server.
DNS 2: Optionally, enter the IP address of another DNS server.
NOTE: The configuration of both the communication ports and the data ports are
automatically exchanged between the two modules.
Control port: Enter the number of the port you want to use.
Communication port: Enter the number of the port you want to use.
Data port: Enter the number of the port you want to use.