Guntermann & Drunck DVI-Vision-IP, Инструкция по установке и эксплуатации

Страница: 124 / 148

Configuration
47 · G&D DVI-Vision-IP
 Controller:
The multimedia controller
ShuttlePRO v2
is used to operate various audio
and video programs. A special USB keyboard mode lets you use the controller to
operate the computer connected to the target module:

LK463 compatible keyboard: You can connect an LK463 compatible keyboard to the
suer modules of the KVM matrix switch. The order of the 108 keys of these keyboards
corresponds to the OpenVMS keyboard layout.
A special USB keyboard mode guarantees that whenever a special key of this key-
board pressed, this action is transmitted to the target computer:
How to select a USB-HID mode:
INPUT DEVICE SETTING
Contour ShuttlePRO v2
 Contour SP2
INPUT DEVICE SETTING
LK463 compatible keyboard  LK463
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Target setup
and press
Enter
.
3. Select the row
USB HID mode
and press
F8
key to select an option (see above).
4. Press
F2
to save your settings.
Co
nfig
Pa
nel
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. Select the desired option (see above) under USB HID mode .
5. Click on Save .