Guntermann & Drunck DVI-Vision-IP, Инструкция по установке и эксплуатации

Страница: 84 / 148

Installation
7 · G&D DVI-Vision-IP
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the DVI-Vision-IP-CPU computer module. If desired, connect a local console to the
computer module.
Establishing a connection to a local management network
Network Management: Insert a category 5 twisted pair cable (or better), which is availa-
ble as accessory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse to the local computer
Mouse CPU: Use the green plug of the twin PS/2 cable (
Twin-PS/2-M/M-2
) to con-
nect the computer’s PS/2 mouse interface to this interface.
Keyb. CPU: Use the green plug of the twin PS/2 cable ( Twin-PS/2-M/M-2 ) to connect
the computer’s PS/2 keyboard interface to this interface.
USB CPU: Use the
USB-AM/BM-2
cable to connect one of the computer’s USB inter-
faces to this interface.
NOTE: If desired, connect this network interface to a local network. This enables
you to access the Config Panel web application from this network and to send sys-
log messages to this network.
NOTE: Mouse and keyboard signals of both consoles can either be transmitted to
the computer using the USB interface USB CPU or using the PS/2 interfaces Mouse
CPU and Keyb. CPU PS/2.