Establishing a KVM-over-IP™ connection for the first time
G&D DVI-Vision-IP ·
20
English
Extended settings of KVM-over-IP connection
Limiting the bandwidth
By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+
Num
to open the OSD of the computer module.
2. Select the row
KVM connection
and press
Enter
.
3. Under
Bandwidth limit (Mb/s)
you can set the bandwidth limit of a KVM-over-IP
connection in Mb/s.
4. Press
F2
to save your settings.
Classifying IP packets (DiffServ)
For QoS purposes (Quality of Service) you have the possibility to use
Differentiated
Services Codepoints
(DSCP) to classify the IP packets.
Through this classification, you can prioritize the data packets, for example,
through a switch.
You can define a DSCP for the IP packets of the keyboard, mouse and control data
(
Communication
data packets), as well as the IP packets of the video, audio and RS232
data (
Data
data packets).
How to configure the DSCPs of the IP data packets:
1. Use the remote hotkey Ctrl+
Num
to open the OSD of the computer module.
2. Select the row
KVM connection
and press
Enter
.
3. Enter the following data under
Network control
:
4. Press
F2
to save your settings.
NOTE:
Entering the value
0
deactivates the limit.
DiffServ Communication:
Define the
Differentiated Services Codepoint
(DSCP) to be
used for the classification of the IP packets of the
Com-
munication
data packets.
DiffServ Data:
Define the
Differentiated Services Codepoint
(DSCP) to be
used for the classification of the IP packets of the
Data
data packets.
Содержание DVI-Vision-IP
