Guntermann & Drunck DVI-Vision-IP, Инструкция по установке и эксплуатации

Страница: 136 / 148

Further information
59 · G&D DVI-Vision-IP
Determining network settings via service port
If you do not know the IP address of an already configured user or computer mod-
ule, you can use the service port of the module to find out the address.
Use any terminal emulator (e.g. Tera Term or PuTTY ) to show the log messages of
the modules.
Installing the device driver
Before establishing a connection using the terminal emulator, install the device
driver
CP210x USB to UART Bridge VCP
.
How to install the device driver to address the service port:
1. Use any web browser to open the website
www.gdsys.de
.
2. Go to
Downloads > Tools & Driver
.
3. Download the device driver for the operating system installed on the computetr.
4. Execute the file and follow the instructions of the installation wizard.
NOTE: When connected to a service cable, the driver provides the Service port of a
user or a computer module as a virtual serial interface (COM port). The virtual
interface can then be selected to establish a connection using the terminal emula-
tor.